Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DECT R4 IP44 Standard

Status
Not open for further replies.

MrIPO

Instructor
Oct 23, 2003
753
AU
FYI
DECT R4 = 3720 and 3725 handsets conform to IP44 and IP42 standard.

The Exact Standard is
IEC 529 / EN 60 529.

IP44
4 = Protected against solid
foreign objects with a
diameter of 1mm and
greater - The object probe, a sphere 1mm diameter,
shall not penetrate at all.

4 = Protected against
splashing water - Water splashed against the enclosure will
enclosure from any direction shall have no harmful
effects.

Because it also conforms to IP42

4 = Protected against solid foreign objects with a
diameter of 1mm and greater - The object probe, a sphere 1mm diameter,shall not penetrate at all.

2 = Protected vertically falling water drops
when the enclosure is tilted up to 15º - Vertically falling drops shall have no harmfull effects when the enclosure is tilted at any angle up to 15º on either side of the vertical.

Hope this helps somebody out, useful info for tenders Etc

MrIPO

ACA - Avaya Certified Associate
ACS - Avaya Certified Specialist
ACI - Avaya Certified Instructor

 
Thanks MrIPO, I have always thought they looked like a ruggedized handset you just confirmed it. :)

ACS - IP Office Implement

"What the Crocodile Hat....was that?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top