DECT R4: Changing of IPBS LAN IP Addresses 1

[KaLLiSToi]

Hello,

I have an IPO 500 and 4 DECT R4 IP base stations, only one acting as master. In order to accommodate to an internal IP reorganization I have changed the LAN IP address of all BS:

- In LAN|IP I have changed the IP Address (no need to change mask, gateway, etc)
- In DECT|Radio I have changed the Master IP Address

Now the DECT terminals are not working (can't make or receive calls), however the display shows they are correctly connected to the BSs. BSs are air synchronized. BSs can ping the IPO unit correctly. Any other setting (i.e. something in the IPO) to touch?

Thanks in advance.

Regards.

-

 

[KaLLiSToi]

Solved.

I forgot to adjust the Master IP address in the IP unit.

 

[IPGuru]

Confirming your own fix is always worth a Star

Some may consider it obvious but those are the things often overlooked.


A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear

 

[tlpeter]

When you leave that field empty then the master will find itself funny enough.

BAZINGA!

I'm not insane, my mother had me tested!