Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DECT handsets

Status
Not open for further replies.

vborkovskij

Programmer
Dec 9, 2009
4
LV
Hi.
Mb some one have similar problem... Customer wants install dect system in his
telephony network, but he did'n like Nortel DECT phones series (74xx, 41xx),
realy, this models is not modern and eye-filling. I tried to connect 4027 and
4070 handsets, but they didn't support BCM features (i can't make call transfer,
call pickup and other). Have you any idea (mb new firmware for Digital Mobility
Controller). Wich handset use You? Siemens, Panasonic, LG or other?

Best Regards.
 
I have never had any problems with an analog set on a Nortel ATA system because of the system... the only issues I had, the customer was incorrectly inputting the codes.

Enhanced ATA, ATA2 Access Codes
All access codes must be preceded with a:

Flash Hook (or Link) then-

*4 Call Forward
#4 Cancel Call Forward
*74 Call Park
*75 Call Pickup Group
*76 Call Pickup Directed
*801 Call Queuing (Call Waiting)
*82 Camp-on
*3 Conference
#3 Conference Splitting
*79 Exclusive Hold
2 Hold (on and off)
5 Last Number Redial
*64 Line Pool Access (plus pool code)
*60 General Page (plus page code)(plus page zone)
*61 Page Sets (plus page zone)
*62 Page External
*63 Page Sets and External (plus page zone)
*69 Priority Call
*83 Privacy Control
*71 Link CO
*78 Pause
*72 Timed Release
*68 Restriction Override (plus password)
*2 Ring Again
#2 Ring Again Cancel
*67 Save Number (save and redial)
*1 Send Message
#1 Send Message Cancel
*0 System Speed Dial (plus code)
*809 Tones On
#809 Tones Off
*70 Transfer
*800 Trunk Answer (Service Mode)
*66 Voice Call
*981 Voice Mail Access
*980 Voice Mail Leave Message
*986 Voice Mail Transfer
 
Customer wants to install digitaly mobility system. It mean, what he use DMC320 and DECT handset, not a analog wireless sets, its base units and ATA adapters.
So, question is about what dect handests propertly works with DMC (features, handover and other).
Ussually we install siemens handset, but there was small problem - somtimes they hang-up and also, siemens stop gigasets manufacturing.
Nortel DECT phones are, hmm.. ugly.. (I mean models, design for BCM-s or Norstars)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top