DECT and OTM in a Succession system

[Sennback]

Hi,

I have installed a Dect system (DMC8) in a succession system (CSE1K).
It is located in slot 3 and 4 in the 3:rd Media gateway cabinet.
That is slot 33 and 34.
But when I connect OTM to it, it says that it has board addresses 45 and 46.

What can I have done wrong?

 

[unkalary]

Sound like you have the 3rd cabinet connected to the second port on the second fiber expansion (IP expansion module) on the main cpu in the main cabinet. If you are connected to the second port of the second card, then are 41 thru 50. you will have to shut down the system to check it out.

 

[Sennback]

No, it is connected on the second port of the first IP daughterboard.

the DMC cards are actually responding if I send a DISC 33 and DISC 34.
But the OTM still shows card 45 and 46...