I have an several IP Office 406's. I am in the process of upgrading them to v2.0. The first 3 upgrades went well, but the 4th one did not. It made it through the config erase, but failed the upload, so now it has no config. I have connected to the DTE port at 38400 8-N-1, and rebooted. I get the following
Branch2 Loader 0.1 (4MB-2x29LV160 Flash-120ns SDRAM-10)
CPU Revision 0x0502
Multi-Sector Erase
It will not respond to any AT commands on the DTE port, and does not send any bootp requests.
Does anyone have any suggestions? I currently have a site completely with out phones.
Thanks.
Branch2 Loader 0.1 (4MB-2x29LV160 Flash-120ns SDRAM-10)
CPU Revision 0x0502
Multi-Sector Erase
It will not respond to any AT commands on the DTE port, and does not send any bootp requests.
Does anyone have any suggestions? I currently have a site completely with out phones.
Thanks.