dead box, will not load BIN

[billyWitchDoctor]

Hi all,

I am connected through the DTE port and LAN, trying to load the bin. The AT commands work and it downloads the bin, but then it returns this:

Invalid software image, reason 0x01

And then it starts over, downloading the bin file from manager again. So the hyper terminal window looks like this:

Multi-sector Erase
.........................................
OK
TFTP Load Start
TFTP Load complete
Invalid software image, reason 0x01
Multi-sector Erase
.........................................
OK
TFTP Load Aborted


Then it starts over, downloading the bin. The TFTP log in manager shows the download and it seems like the file is sent ok (computer is directly connected to the box).

The unit is an IP412. I have tried loading the version 3.0 bin and the 2.1 bin with no success. I did get it to return "...reason 0x0B" instead of "...reason 0x01" once.


Any help appreciated, thanks for reading.

 

[billyWitchDoctor]

haha...funny story...turns out i was trying to load the wrong bin file all along. I got the right one and it started right up.

I blame the machines...

 

[Morrack]

Really, Mr. Anderson, you humans are so - so - so arrogant in your assumptions, so convinced of your own fleshly superiority that it amazes me you ever survived without us for as long as you did."



Peter Sherwood

Morrack Consulting

http://www.morrack.com

 

[h5n1]

lol peter.....

SET CRTL ALT DEL = #728
-----------------------
greg