I have a point to point T1 between an Option 11C and an Option 81C. The 81C has a dual loop PRI card on loop 116 w/ a Dchannel dauterboard on it. I tried bringing it up but the Dchannel won't come up. I got this on the 81C side when I tried to enable the MSDL:
.enl msdl 8
GROUP 3
MSDL108 GROUP 3 MSDL 8 DCH
OVL021 IDLE
SDL100 BUSY
OVL021 BKGD
SDL100 BUSY
OVL021 IDLE
SDL100 BUSY
OVL021 IDLE
SDL100 BUSY
SDL1302 DCH 2
DCH:012 ENL APPL FAIL (TRNSTSTATE ) AUDIT
DCH:012 ENL APPL FAIL (TRNSTSTATE ) AUDIT
DCH:012 ENL APPL FAIL (TRNSTSTATE ) AUDIT
DCH:012 ENL APPL FAIL (TRNSTSTATE ) AUDIT
DCH:012 (DOWNLOAD SUSPENDED)) AUDIT
I'm not on site. Someone will be there tomorrow. Any ideas?
Thanks
.enl msdl 8
GROUP 3
MSDL108 GROUP 3 MSDL 8 DCH
OVL021 IDLE
SDL100 BUSY
OVL021 BKGD
SDL100 BUSY
OVL021 IDLE
SDL100 BUSY
OVL021 IDLE
SDL100 BUSY
SDL1302 DCH 2
DCH:012 ENL APPL FAIL (TRNSTSTATE ) AUDIT
DCH:012 ENL APPL FAIL (TRNSTSTATE ) AUDIT
DCH:012 ENL APPL FAIL (TRNSTSTATE ) AUDIT
DCH:012 ENL APPL FAIL (TRNSTSTATE ) AUDIT
DCH:012 (DOWNLOAD SUSPENDED)) AUDIT
I'm not on site. Someone will be there tomorrow. Any ideas?
Thanks