DCH Trace - Incoming Call Barred?

[DRNurse]

Any ideas on what would cause this?
% DCH 62 OMSG SETUP REF 0000001E CH 62 30 TOD 10:21:24
% FEAT :NAS
% FEAT :NCID
% PROGRESS: ORIG ADDR IS NOT ISDN
% CALLING #:92614 NUM PLAN: PRIVATE
% CALLED #:92024 NUM PLAN: PRIVATE
%
% DCH 62 IMSG REL COMP REF 0000001E CH 62 30 TOD 10:21:24
% CAUSE :INCOMING CALL BARRED
% DIAG: 199

 

[johnpoole]

very strange numbers,, a 5 digit dn calling another 5 digit dn from a trunk.. is that what your trying to do? i have that on a tie but not from the pstn

john poole
bellsouth business
columbia,sc

 

[dlesap]

The only way barring an incoming call on a DID trunk is with CLS RDI. I guess your trunk is not DID... but check CLS anyway...

 

[DRNurse]

We use 5 digit extensions in the building due to large numbers of extensions.
Strangely enough, we found that calling over the MCDN produced inconsistent results, and only by enabling 1 channel (any channel) on both Primary and Backup D-Channels on the MCDN caused the complaints to immediately stop?
Bizarre! Since we've done that no complaints have occurred, but I'm at a loss to explain why disabling 1 channel would do that. We have 10 PRI's between the 2 systems, meaning we now "only" have 299 channels, not 300?

 

[dlesap]

isn't there any blocking values in the incoming member? Compare the faulty one and a running one LD 20 PRT TNB

 

[DRNurse]

Nothing, all identical? Have changed both sides to only have 29 channels and no problems?
If ever we find out, will post and let you all know.