Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DCH messaging?? 1

Status
Not open for further replies.

stemanc

Technical User
Nov 27, 2006
68
0
0
GB
I've got an option 61 and it keeps firing out the output below. Anyone know what it means?

DCH000
.stat mon
DCH MON ON
DCH 012 : MSGI - DSBL MSGO - DSBL
DCH 015 : MSGI - DSBL MSGO - DSBL
DCH 016 : MSGI - DSBL MSGO - DSBL (UIPE)
DCH 017 : MSGI - DSBL MSGO - DSBL (UIPE)
DCH 027 : MSGI - DSBL MSGO - DSBL

.
DCH055 DCH: 15 RLS CONFIRM TIME: 12:30:45 6/12/2008

DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006 15 076455E8 00000006
DCH1014 15 076455E8 00000006 15 076455E8 00000006
DCH1014 15 076455E8 00000006 15 076455E8 00000006
DCH1014 15 076455E8 00000006 15 076455E8 00000006
DCH1014 15 076455E8 00000006 15 076455E8 00000006
DCH1014 15 076455E8 00000006 15 076455E8 00000006
DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006 15 076455E8 00000006
DCH1014 15 076455E8 00000006 15 076455E8 00000006
DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006

DCH1014 15 076455E8 00000006

I left the stat mon at the top to show that it should all be switched off.

Thanks
 
It is telling that the dchannel dropped. It has nothing to do with dchannel messaging these are errors in the system. You need to investigate.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
thanks

Any clues on where to start looking? DCH is a bit of new territory for me.

Thanks
 
If this was a working DCH prior to this problem, then do the following:

Attempt to disable DCH in LD 96
DIS DCH 15
STAT DCH 15 make sure its disabled
ENL DCH 15
STAT DCH 15 see if it establishes.

If DCH does not establish, call your telco and put in a ticket, make sure to tell them to check ur DChannel.
 
When I re-enable the the DCH it comes up fine for a few minutes but then I get


DCH 15 OMSG RESTART REF 00000000 CH 0 TOD 13:31:19
TYPE: ALL CHANNEL

And then the errors start repeating
 
apparently, your B Channels are restarting. When you get this error, how does the T-1 look?
 
The last posting is a dchannel message probably when you establish the dchannel and it is an outgoing message telling the other end to restart all channels. This is referring to the B channels.

You need to look up DCH1014 in the system messages NTP to see the cause of the error.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
thats an invalid IE message
usually has something to do with the interface number
when more that one t1 on dchannel each t1 gets an interface id that has to match both sides or pbx thinks call is coming down a certain bchannel and its not there
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top