DCH Messaging turn off

[dirkfuzzbucket]

I keep getting this message

DCH: 63 MSG LOG INDICATION TIME: 13:36:48
SETUP:7
CONNACK:7
DISCONN:1
RELEASE:5
REL COP:1
FACILTY:65535
INFO:6

I've searched the NTPs on how to turn it off to no avail any one help?

 

[cmawbey]

IN LD 96 where 'x' is the DCH number:

To activate DCH monitoring:
ENL MSGI x (enables inbound messages)
ENL MSGO x (enables outbound messages)

To set the monitoring output level:
SET MSGI x MON 0 (enables plain text on inbound)
SET MSGO x MON 0 (enables plain text on outbound)

SET MSGI x MON 1 (enables plain HEX on inbound)
SET MSGO x MON 1 (enables plain HEX on outbound)

SET MSGI x MON 2 (enables identified HEX on inbound)
SET MSGO x MON 2 (enables identified HEX on outbound)

To deactivate DCH monitoring:
DIS MSGI x (disables inbound messages)
DIS MSGO x (disables outbound messages

Colin

 

[dirkfuzzbucket]

Tried that (I should have said)

stat mon
DCH MON ON
DCH 002 : MSGI - DSBL MSGO - DSBL (UIPE)
DCH 003 : MSGI - DSBL MSGO - DSBL
DCH 008 : MSGI - DSBL MSGO - DSBL
DCH 009 : MSGI - DSBL MSGO - DSBL
DCH 010 : MSGI - DSBL MSGO - DSBL (UIPE)
DCH 011 : MSGI - DSBL MSGO - DSBL
DCH 018 : MSGI - DSBL MSGO - DSBL (UIPE)
DCH 019 : MSGI - DSBL MSGO - DSBL
DCH 034 : MSGI - DSBL MSGO - DSBL (UIPE)
DCH 035 : MSGI - DSBL MSGO - DSBL
DCH 044 : MSGI - DSBL MSGO - DSBL (UIPE)
DCH 045 : MSGI - DSBL MSGO - DSBL
DCH 046 : MSGI - DSBL MSGO - DSBL
DCH 047 : MSGI - DSBL MSGO - DSBL
DCH 050 : MSGI - DSBL MSGO - DSBL
DCH 060 : MSGI - DSBL MSGO - DSBL (UIPE)
DCH 061 : MSGI - DSBL MSGO - DSBL
DCH 062 : MSGI - DSBL MSGO - DSBL
DCH 063 : MSGI - DSBL MSGO - DSBL


Still giving me DCH 63 Log???????????

 

[unkalary]

The information you are displaying is generated because of a PEP (patch) inserted by NORTEL (you vendor). Do know which one but I have a switch that does the same thing and was told that a PEP was placed in the switch to do this.

 

[dirkfuzzbucket]

Thats why I can't find where the messaging is.....thanks UKLARRY