DCFW vs CFW 1

[CommoGuy101]

Hello all,
I am working on a CS1000.
I have a phantom extension that has DCFW (which is pointing towards the VM pilot)
Users would like to periodically CFW the extension to a DN type CDP.
My question is:
Does the CFW take priority over the DCFW?

Thank you,
CommoGuy101

 

[yyrkroon]

NO

 

[yyrkroon]

A phantom only looks at DCFW

 

[Firebird Scrambler]

With a phantom DN, the DCFW prompt will always be followed. However, you can also have a CFW set, and with a SCPW number added in, you can change the destination by using the remote call forward feature. At this point the CFW becomes the actual destination until the RCFW is cancelled.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley

 

[GHTROUT]

Agree with firbird - DCFW and CFW can both exist on the same Phantom. Here is a Redirection Guide, including Remote Call Forward

http://www.ghtrout.com/rdr/index.html

~~
Gene at GHTROUT.com