DBase5 initialization error Code 3675

[PVier]

Hello,
I hope everyone has a helpful hint for me at this time.
I dont understand what is wrong.
Dbase5 for DOS runs on more than 5 workstations in my corporate LAN. All with WindowsXP Professional SP2.
But on two Stylistic LT-C500 Tablets i get this error message whenever i try to run dbase.exe in on the command prompt. Whats wrong?
for Example the Message i called in the dbase.err

DBASE.EXE terminating due to internal error code 3675

From version 5.0xx58 (08/13/94) on: Sat Jan 5 20:58:49 2008

Memory available summary at abend:
for Option ALL [0], 7cbd5c82 [2043735 K]
for Option HEAP [1], 00041c82 [ 263 K]
Bytes used in heap: 0002727e, [ 156 K]
for Option REAL [2], 00079de0 [ 487 K]
for Option EXT [3], 7c484000 [2036240 K]
for Option VIR [4], 7ffe0000 [2097024 K]
for Option PHYS [5], 0ff78000 [ 261600 K]
for Option BUFF [6], 00740000 [ 7424 K]
for Option SWAP [7], 269a7000 [ 632476 K]
for Option MAX [8], 00f00000 [ 15360 K]
---
SafeCushOK=1, SafeCushRes=24, dBASESOS=0
OPEN FILES:
F:dbase1.res mode=33, bhot=0, handle=3
---
---- START END LENGTH
CODE: 02af0000 02d3ffff 00250000
DATA: 02d40000 02d6d9e4 0002d9e5
STACK: 02d6d9e5 02d94aaf 000270cb
isVMM =1
dpmiver =90
cpumod =3
bitdp =1
vmdpmi =1
isWinDPMI =0
lockcnt =2
memory lock at: 02affdf8 for 00003aa4 bytes
memory lock at: 02d40000 for 00054ab0 bytes
interrupt 9 handler at 02b02856:000003a7
interrupt 1b handler at 02b02010:000003a7
interrupt 23 handler at 02b02010:000003a7
DPMI_MEMORY status [0]info:[on error]
largest = 00f00000
maxPageAlloc = 00000f00
maxBlock = 00000b61
total = 0007ffe0
Avail = 00000b68
PhysNIU = 0000889a
PhysMan = 0000ff78
FreeSpace = 0007c484
SwapSize = 000269a7
Internal Stack trace at termination.
EBP=02d948bc caller: 02baaab5 map=000baab5 abenddb
EBP=02d948cc caller: 02afc61a map=0000c61a
EBP=02d948e0 caller: 02b53b7f map=00063b7f
EBP=02d9497c caller: 02b04b13 map=00014b13
EBP=02d94a94 caller: 02af00cf map=000000cf
EBP=02d94aa4 caller: 02d256fe map=002356fe
EBP=00000000 caller: 02d94ab0 map=002a4ab0 Startup
--

 

[PVier]

Hello,

that problem is resolved! Peter, from the german dbase newsgroup, had the crucial hint.
The problem was the entry "files" in my config.nt file in %windir%\system32 directory. That entry must have a value more than "10".
On my systems run dbase.exe with Files=20 at this time.
I hope, anyone they get the same error message, can help this hint too.
Greetings from germany and happy 2008 around the world.

PVier
Ruediger Kutzik

 

[dbMark]

Be prepared that even that number may be too low if you need to have many tables open. Besides dBase itself needing a certain number of file handles for itself, each open table needs a file handle, then one for its indexes. Depending on the application's needs, many programmers set their CONFIG.DB files= values to 60 or 80.