Daylight Savings Time, SV8300 1

[dartzz]

I have a couple of SV8300 pBXs out in the field, I remoted into them to change the time using the CM02 command,
which executes successfully. however, the phones display 1 hour ahead, and line 3 of the System dData afor CM02
Reading out of daylight saving time in Main Unit is also 1 hour ahead, any suggestions?

I have also trie to chnge using the command tab, and the quick setup under the standard tab.

Thanks!

 

[belevedere]

It sounds like automatic DST has been set up. Can you manually set it back one hour?
See CMD's 438>00 + 01 and 6730/31.

 

[belevedere]

CMD 02>03 will read out the DST setting.

 

[dartzz]

Ended up changing time in Command 02 back 1 hour as you suggested and it works, CMD 43 appears to be set up for DST,
but nothing is setup in 6730/6731. Thanks again!

 

[neax]

438-00-0320 March - 2nd Sunday
438-01-1110 November - 1st Sunday
438-02-20150308 Change STD time to DST
438-03-20151101 Change DST to STD time
6731-00-0 (00 is the location number of Dterm as per CMD 1239 - should be 00)

To blow-out DST programming if 02-2 and 02-3 don’t match time wise do 6730-00-CCC

Example:

Let's say right now the time is 9pm

02-2-20:00:00
02-3-21:00:00 (now time)

02-3 is the now time (9pm aka 2100hrs) but time change needs to be executed on 02-2