Daylight Savings Time change...

[1SIKV35]

My Definity G3siV12 is an hour off. How can I change the time or enable Daylight-Saving-Time? I "displayed time" and it looks like DST is not enabled. I tried "change time" but a list comes up that I'm not prepared to change.

Any info is appreciated.

Thanks.

-Peter

 

[qz01gs]

set time

What type of login do you have ? You might not have the relevant permissions

 

[4merAvaya]

There are 3 screens that need to be checked. Start with 'change daylight-savings-rules'. Verify that the start date and end date agree with the new rules. Next to 'set time' and confirm that the time displayed is correct (military time) and that the daylight saving rule is set correctly, usually '1'. Lastly, do 'change locations' and verify that the information there is correct.

Kevin

 

[koglass]

It sounds like you are using Avaya Site Administration to try to make these changes. To change the time in my switch I have to use a Web Browser such as IE. You too more than likely have to use a web browser to make the time change.

 

[4merAvaya]

The initial statement is that the switch is a G3siV12. The web interface is only used on S8xx0 servers.

Kevin