Day, Night 1 and Night 2 definition in MiVoice Business 3300 2

[Mark78_imported]

hello,

Where is the day, night 1 and night 2 time Frame defined?
Can it be changed?

regards
Mark78

 

[wireman50]

Depending on your software level it can be defined in scheduling and in maintenance commands under programme service.

 

[voipneerd]

HI
Best Way to do that by scheduler;
Under maintenance and diagnostic;
you can find Scheduler;
select Add

And you'll see window with 2 tabs
1- Event Parameters.
you can define the name, and when to the event will be activated and the repeats

2- Activity Parameters
Select - Go to, night services.
And then you'll see the level night 1 and night 2

BR

 

[kwbMitel]

With respect to what exactly?

Of course it can be changed but what are you trying to change?

Methods may vary.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[Billz66]

and software level now plays a part as they have expanded its capabilities with Version 8

most of our sites set the mode manually using keys on the phone , some customers automate it using the scheduler

If I never did anything I'd never done before , I'd never do anything.....

 

[Mark78_imported]

I would like only to Change the time frame of of this 3 Options.
But first i Need to see what is the actual time Frame set.

regards
mark78

 

[Mark78_imported]

I just wanted to see what is the Default time set for day and for the 2 night Options.
We are using Software Version 8.0 PR3

regards
Markus

 

[voipneerd]

Hi
you can enter the following command in the Maintenance Commands>
PROGRAMMED SERVICE DISPLAY

and it'll show you the time for each service

BR

 

[Mark78_imported]

thanks voipneerd,

I see now that

PROGRAMMED SERVICE SCHEDULE IS OFF
PROGRAMMED SERVICE SCHEDULE DAY IS ON
PROGRAMMED SERVICE SCHEDULED DAY: DAILY 09:00:00
PROGRAMMED SERVICE SCHEDULE NIGHT1 IS OFF
PROGRAMMED SERVICE SCHEDULED NIGHT1: DAILY 17:00:00
PROGRAMMED SERVICE SCHEDULE NIGHT2 IS OFF
PROGRAMMED SERVICE SCHEDULED NIGHT2: DAILY 18:00:00

I need to Change that the day will start at 6 am.
How will I do that?

regards
Markus

 

[wireman50]

Maintenance commands:

programmed service schedule day: daily 06:00:00 submit

then

programmed service schedule is ON submit

both commands should come back with a success.