Date and Time on Messaging 7.0

[oge]

Do you need to Log into a Partner Messaging 7.0 with the GUI interface to set date and time. I could not find it anywhere by phone programming through system manager access. If it can be done through phone programming could someone please post. Thanks

 

[exsmogger]

It takes the system date and time from the ACS processor. Procedures #101 and #103 in ACS programming.

Brian Cox

http://www.jandjcommunications.com

 

[oge]

I thought that was the case also... but my date and time on the processor are correct and the time stamp on voicemail started at 12 am on 1/1/06, and like I said could not be changed. They were definately not the same. I beleive it should not matter that the processor version is 1.1. Partner messaging can be installed in any ACS correct?

 

[Dexman]

The Avaya Partner Messaging will work with release 1.1 or higher.

 

[1043]

re-enter your time on the ACS.

 

[TouchToneTommy]

Make sure that ONLY the VM ports are in hunt group 7. The ACS and the Messaging use the 1st port in the group to communicate date/time, and day/night status.

Remove any extraneous ports assigned, then restart the phone system to get it to synch the time to the VM