I AM NEW TO AI WORKING IN AI CS. I AM COPYING A DRAWING. ON A NEW LAYER, I TRACED WITH THE PEN TOOL THEN WANTED TO MAKE THE LINE DASHED. IT DOESN'T WORK. WHEN I OPENED A NEW ILL. FILE IT WORKED LIKE A CHARM. I WENT BACK TO THE ORIGINAL I WAS WORKING ON AND ALL THE STROKE SETTINGS SEEM TO BE THE SAME. WHY WON'T IT WORK ON THE LAYERS. I TRIED SHUTTING OFF THE OTHER LAYERS IN MY DRAWING AND IT STILL DOESN'T WORK. THANKS IN ADVANCE FOR YOUR HELP. I REALLY APPRECIATE ALL THE INPUT FROM THE FORUM.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
dashed line with pen
- Thread starter vanjohn
- Start date
- Thread starter
- #2
WELL I THINK I FIGURED IT OUT. FOR SOME WHO MIGHT HAVE THE SAME TROUBLE. IT SEEMS THE WEIGHT IN MY STROKE PALLET WAS NOT CORRECT. I THINK IT HAS TO HAVE "IN" AT THE END TO OPERATE. I ASSUME THIS IS FOR INCHES. HOPE THIS HELPS SOMEONE ELSE.
- Status
Similar threads
- Locked
- Question