Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dashed and dotted stroke 1
- Thread starter dark2
- Start date
-
1
- #2
Indesign can vary length of dashes and spaces within strokes.
Check out the bottom area of the Stroke panel...it should have a handful of horizontal boxes...dash gap dash gap dash gap.
try something like dash 10, gap 4, dash 2, gap 4. this will give you the idea and then you can fiddle.
Alternatively, if your outline is intended to be horizontal then check out the tabs window. click on, or create, a tab and enter -. in the leading box. this should give you -.-.-.-.-. between the tabs
good luck
ross
Check out the bottom area of the Stroke panel...it should have a handful of horizontal boxes...dash gap dash gap dash gap.
try something like dash 10, gap 4, dash 2, gap 4. this will give you the idea and then you can fiddle.
Alternatively, if your outline is intended to be horizontal then check out the tabs window. click on, or create, a tab and enter -. in the leading box. this should give you -.-.-.-.-. between the tabs
good luck
ross
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question