Darwin Quicktime Streaming Server for NT

[swimclan]

I am getting an error when trying to start a playlist in Darwin....

"Network Initialization Failed. IP not enabled to run BcastPlaylist"

Any ideas? Any Darwin gurus out there?

Thanks in advance,
Matt

 

[Guest_imported]

Hello.

I experience the same problem you describe with the Darwin Streaming Server (3) on Windows 2000.

Network initialization failed. IP must be enabled to run PlaylistBroadcaster

Did you find out what was wrong?

Regards, Jon
jon_bohm@hotmail.com

 

[Guest_imported]

Hello.

I experience the same problem with the Darwin Streaming Server (3) on Windows 2000.
When I try to broadcast a playlist, I get the following error:
Network initialization failed. IP must be enabled to run PlaylistBroadcaster

Does anyone know the solution????

regards,
Ashish

 

[FlorianG]

I have a similar problem, without any answere...

In "Darwin Administration Server" (

http://myserver:1220)

I can make a playlist, but if I want to start it by pressing the playbutton,
I receive the following ERRORMESSAGE: "Cannot open the Internetside

http://localhost:1220/startstopbcast.cgi?state=start&pl=LoeschMich"

LoeschMich is the name of the Playlist...

The cgi-Skript exist, and also the command written behind it.
There are other cgi-Files in the same Folder which work without any problems.

At the moment, I make my files streamable by following Stepps.
1. Creating a Playlist with the Darwin Streaming Server
2. Editing the ".config" File in the corresponding Folder under the Playlistdirektory(change Port(e.g.6000) IP-Address(127.0.0.1))
3. Open DOS-Box, move to Playlist-Folder and type: playlistbroadcaster -preflight LoeschMich.config
4. Copy the sdp-File in to the "Movie"-Folder
5. Create a ".bat"-File, with following command:
playlistbroadcaster LoeschMich.config

That's it. But it's not realy fine to make it in this way. Normaly it shoult work by pressing the "play"-button...

Thanks for any idears

Greetings Florian G.