D100/D160 Default passwords..

[telecotek1]

Can someone please share the password for web access to the base station as well as access to the addministration menu of the handset. Is it me that info isn't in the doc.

Thanks in advance..

 

[telecotek1]

OK duh.. found the d100/d100 username/password but still can't find the handset...

 

[CarGoSki]

I almost understood what you are looking for. Are you looking for information on the D160 handset?

 

[telecotek1]

Yes, was looking for the login to the D100 base and the administration menu to the D160 handset. But I found what I 'm looking for with that. Trying to figure out the button map now.. just always says button free on the 8 programable buttons..

 

[PatLeb]

Open Manager and go to File, Advanced, Security settings, log with name:security, pass:securitypwd
after go to the list of service: IPDECTService and then change the password. but you must know This account is used for DECT R4 system provisioning via an IP DECT trunk.
But for me i never use this for all my sip base station. just confirme with system status IP Dect base.
Create the user with is pin number, press the registration botton on the base and registre you handset.



I understand quick but you must tell me often, i,m not sick, i,m normal.

 

[azrael2000]

Hi Patrick.

I think this is what I need to do for my handset, however I don't see how to do this with the System Status Program.

Normally I would create the user with Manager.

How do you create a user in System Status??

Regards

 

[snowman50]

You can't in SSA
You can only create a user from manager.

The buttons are programmed from the handset, feature, more , butng,
Select the button and apply the feature from the list.


BLF is done from the manager under button programming, user,extn no.