D-Link 4 port router and Pca Bell DSL

[markn01]

I can get my DSLmodem to work when connected directly to my PC lan card, But not through my D-Link DI-804 router. I can my laptop and PC. I can setup the router to use PPPoE protocal and it seem sto establish a connection with the modem because the device staus page in the router setup menu shows a connection to the modem.
Any suggestions?

Thanks,
Mark

 

[jeter]

when the modem is hooked directly to your machine do you get a link light? Are you using a straight or a cross over
cable? What application are you using to authenticate to the dsl. Jeter@LasVegas.com
J.Fisher CCNA

 

[markn01]

Yes I get a link light and I do not use a crossover cable.

Mark

 

[IYOK]

If the router doesn't have built in DHCP, you actually have to configure a few things under your OS. Are you using Linux/Win9x/WinNT etc?

 

[webnetwiz]

I use the same model for my cable access, and works like a charm. You have to know the settings given to you by the ISP in order to get everything working. You need to setup your machines for DHCP. Go to D-Link's website for support or call them, they'll be able to assist you.