D-CHannel Monitoring...

[Spokes0831]

I am turning on d-channel monitoring in ld 96 and nothing is appearing. It appears a technician turned off the output target for the tty port I am on, how do you turn it back on for a specific tty port?
Thanks in advance!

 

[cmawbey]

try this in LD 96

ENL MON TTY Prepare to print DCH messages on the TTY.

 

[Spokes0831]

No dice. No output on my screen from our main incoming dchannel, which is extremely busy.

 

[cmawbey]

did u try

LD 96
enl mon tty
enl msgi x ( x= your d channel number )

 

[Firebird Scrambler]

If they were DASS ISDN channels, then you need to have USER = BUG on your TTY port.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[bdmcdonald99]

Check to make sure USER = MTC on your TTY port that you are logged in on.

It's a phone system, NOT a clock!

 

[fritzthecat]

also in LD 17 under PARM, ERRM, BUG needs to be enabled

ERRM ERR BUG AUD