D-channel messages

[coniglio]

we just installed a new PRI circuit last night and i keep getting all these messages. Are these messages good, bad or indifferent? thanks for your help.
DCH 7 IMSG SETUP REF 000094BD CH 7 2 TOD 10:13:00
DCALLING #:2023294428 NUM PLAN: E164
CALLED #:9300 NUM PLAN: E164
DCH 7 OMSG ALERT REF 000094 BD CH 7 2 TOD 10:13:00
DCH 7 OMSG DISC REF 00008DDF CH 7 1 TOD 10:13:00
CAUSE :NORMAL CALL CLEARING
DCH 7 IMSG RELEASE REF 00008DDF CH 7 1 TOD 10:13:00
DCH 7 OMSG REL COMP REF 00008DDF CH 7 1 TOD 10:13:00
90

 

[PMcCallum50]

It appears you have enabled d-channel messages to be displayed. Ld 96 allows you enl or dis messages (msgi for inbound, msgo for outbound). This can be a single d-channel or you can enable multiple d-channel messages.

 

[coniglio]

okay, thanks. One of our offices is now unable to call this office that we just installed the new circuit in so I wanted to know if those messages contained any info to explain why. Guess not. Thank you again for your prompt resonse.

 

[PMcCallum50]

Sorry for the vague response earlier. You really wanted information regarding the entered messages. The few messages displayed (2 different calls, 1 on 7 2 and 1 on 7 1) appear to show normal activity with the little bit shown.