Hi to all!
I've a CX400 with 2 SP. Until today only the first FC-port of both SP was connected to FC-switch (dual fabric). I've attached the other two ports (SPA-1, SPB-1) to the switches, nothing more. Then connected a new host (right zoning!) to SPA-1. The naviagent has registered automatically the HBA with the SPA-1 port. With Navisphere I've configured a new Storage-Group and a right lunmasking. The new LUN was mounted from the new host and all went well. Finished my tests, I've disconnected the host (removed the zoning) but I cannot deregister the Initiator record. It seems it's already connected. I've also disconnected the fiber from the SPA-1. There are NO connections between switch and SPA-1 and no zoning configured. But into "Connectivity Status" my host is always connected to "SP Port A-1", Fibre Logged in "YES", Registered "YES".
How it is possible?
Normally detaching the Fiber or removing the zoning, I can see the Ghost entry and deregister the host without problems.
Any suggestions?
Thank's a lot, Simon
Navisphere 6.5.0.3.3
I've a CX400 with 2 SP. Until today only the first FC-port of both SP was connected to FC-switch (dual fabric). I've attached the other two ports (SPA-1, SPB-1) to the switches, nothing more. Then connected a new host (right zoning!) to SPA-1. The naviagent has registered automatically the HBA with the SPA-1 port. With Navisphere I've configured a new Storage-Group and a right lunmasking. The new LUN was mounted from the new host and all went well. Finished my tests, I've disconnected the host (removed the zoning) but I cannot deregister the Initiator record. It seems it's already connected. I've also disconnected the fiber from the SPA-1. There are NO connections between switch and SPA-1 and no zoning configured. But into "Connectivity Status" my host is always connected to "SP Port A-1", Fibre Logged in "YES", Registered "YES".
How it is possible?
Normally detaching the Fiber or removing the zoning, I can see the Ghost entry and deregister the host without problems.
Any suggestions?
Thank's a lot, Simon
Navisphere 6.5.0.3.3