Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cut off extension number 3

Status
Not open for further replies.

MZKc

Programmer
Aug 23, 2022
22
BR
When I receive calls on my analog device, my display shows the number cut off.

The image below is of my device's display, extension 398 called me, but only 98 appeared. It only happens with analog phones, SIP or J series phones show the extension number correctly.
 
 https://files.engineering.com/getfile.aspx?folder=e376cc58-d052-4d8a-bc27-ca31e4d350b1&file=ramal.jpg

How are these phones connected..directly to ipo ports or via an add on cordless system
Are you routing calls to these extns using another device.
Could be why the first digit is being removed.
 
Directly to ipo... it has nothing external removing the first digit.
 
plug in a regular analog phone to test so you can see if the cordless may strip the first digit for some reason.

System Status should show the call originator and if it shows the full 3 digits then it seems more likely the device.

Joe
FHandw, ACSS, ACIS

 
i needed to change caller display name in extension settings from DTMF to FSKA
 
Good to hear that you have it working.
I usually simply use the "On" option on the caller ID but I am in North America and Brazil may be different with the devices.

Have a star for posting the solution.

Joe
FHandw, ACSS, ACIS

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top