Curry SIP on IPO small edition 4.2 do no work

[calin84]

I can not make it work, incoming or outgoing.
SIP carrier is Intelechoice(CurryIp)
IPO Small edition 4.2
Cable ISP
Netgear router WNR3500L, I forward ports
This is what Curry IP ask me to do.
You may also consider opening the following ports in your router.

Port 7 Echo
3478 => SIP UDP Port used for STUN requests from the IP Office to the SIP provider.
5060 <= => SIP UDP/TCP* SIP Line Signaling
49152 to 53247* <= => RTP/RTCP UDP Dynamically allocated ports used during VoIP calls for RTP and RTCP traffic. The port range can be adjusted through the System | Gatekeeper tab.

The router is open, not firewall.
No firewall in the cable modem.

Please help.

 

[calin84]

it is working outgoing only,
Changed IP route
0.0.0.0
0.0.0.0
192.168.1.1 (my router gateway)
LAN1 (my lan port)

any help.

 

[oldskoolindex]

have you disabled ALG on the router?

 

[calin84]

yes, alg is disable.

 

[tlpeter]

Do you have setup sip uri's on the trunk ?
Do you have setup incoming call routes ?


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[oldskoolindex]

the wonder of sip.
what is the status of firewall/nat in the network topology tab?

maybe you could download xlite to your laptop/pc and put your sip account details in to see if you can get incoming to work,

 

[calin84]

yes, I setup Sip uri and incoming route, still same.