Current debug password on an MICS with 7.0

[norteld]

Is there anyone out there who knows how to find out what the debug password is on an MICS with 7.0 software based on the current time & date? I have a client who has the above mentioned system with a PRI enabler keycode, and the installer and admin passwords have both been changed so I'm unable to access the time & date option, or any other programming. The former vendor has since passed away, so there is no way to recover the current password. Obviously I don't want to short out the capacitor on the motherboard because they will lose the installed PRI enabler. Any help would be GREATLY appreciated. There are some programming changes that need to be done, and I'm currently stuck! Thanks to all in advance!

 

[exsmogger]

Load the browser portion of NRU and you should be able to see the current passwords.

Brian Cox

 

[norteld]

Unfortunately I don't have NRU11 which I believe is needed to connect to an MICS with 7.0, I only have NRU10. I guess I'll have to get it. Thanks for the advice Brian!

 

[exsmogger]

Give it a shot with NRU10. At the worst it just won't work. If that fails you can download NRU11 here:

http://www.jandjcommunications.com/NRU11/NRU11.zip

Brian Cox

 

[norteld]

I've tried it before on an MICS with 7.0 with no luck, but not on this particular system. I'll give it a shot, and if it doesn't work, I'll try the NRU11. Thanks again for your help Brian, I really appreciate it!

 

[Firebird Scrambler]

Here is my F.A.Q giving full instructions.

http://www.tek-tips.com/faqs.cfm?fid=7214

Here is the F.A.Q for the n/a hex location codes.

http://www.tek-tips.com/faqs.cfm?fid=6692

Let me know if it works please?.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.