Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CUCM forwarding calls off site

Status
Not open for further replies.

Scparks

Technical User
Jan 16, 2013
45
US
I am trying to forward users extensions to their cell phone without actually have a physical phone on site. Can this be done through a translation table or call route in CUCM ?
Thank you.
 
You can do it a few ways but i typically do it via the Translation Pattern.

Certifications:
A+
Network+
CCENT
CCNA Voice
CCNP Voice
 
I built a Translation Pattern but when I dial the number the system says "your call can not be completed". Not sure what I have wrong but any help is appreciated.
Thank you.
 
Generally it would mean your CSS isnt correct. It would need to be whatever you use to dial externally. Also if you use a prefix, make sure thats in there somewhere too. So the TP would look something like this:

Pattern = The extension of the person.
Partition = Whatever partition you put your numbers in for the phones.
CSS = Whatever CSS is used to dial externally
Called Party Transform Mask = The cell number
Prefix Digits = If you use a prefix this goes here.

Certifications:
A+
Network+
CCENT
CCNA Voice
CCNP Voice
 
You can also program a cti route point and fwd all to mobile
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top