Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CUCM 8.6: Extension to Extension Dialing Error Message 1

Status
Not open for further replies.

darthrob

IS-IT--Management
May 1, 2015
11
US
Hi,

I'm having a problem with two remote sites linked via MPLS dialing an extension. When a user dials extension 777 from site 1 & 2 (any phone) they get an announcement from Cisco

"your call cannot be completed as dialed, please consult you directory and call again or ask your operator for assistance"

Extension 777 is a hunt pilot with various times for IT support.

All other sites are able to dial extension 777 no problem, it's just site 1 & 2 that have the issue.

If I left out pertinent information I apologize. Thanks for your support in advance.

Rob
 
Check the calling search space of the phones that are dialing the hunt pilot. Make sure that it includes the partition of the phones you are trying to reach.
Have you run the DNA tool? What are the results?
 
The CSS did the trick. Thanks for the help whykap.

Have a Happy New Year.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top