Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1K Release 7 Setting up putty to telenet into terminal

Status
Not open for further replies.

rcamron

IS-IT--Management
Jan 10, 2011
3
US
I need assistance with setting up putty to telenet into my call server. I am on release 7.0 for a CS1K system. Pretty new to the whole system and looking any assistance anyone could offer.
 
Telnet is disabled by default. You have to use SSH or RLOGIN to connect.
 
Using putty, normally telnet to your signal server IP, and then do cslogin to call server.
 
To properly get into a 7.0 Switch, you will need to use SSH, which will ask for the RSA token verification, from there, you can login to the Linux Base (if co-res) or directly to the VxWorks. If you are running linux, then just issue command cslogin to get into the Call Server.

From 6.0+ telnet is usually disabled by default, but can be fixed by issuing harden telnet off (or something similar)
 
Thanks for all the information everyone. It is working.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top