cs1k problem connecting with procom plus

[gullsinn]

i need help connecting nortel cs 1k with procom plus
what i have is a 25 pin adapter which i can put into PC's printer port
the site is used - removed from another site.
i dont know its IPs
when i boot MGC shows 004 1 (shelf loop) after boot pass etc
however i dont know how do i connect it with procom using 25 pin adapter
what ip address or port etc
can any one guide please

 

[KCFLHRC]

You sure cant connect to the printer port on your PC. You need to use a com port, typically a 9 pin connector.

 

[gullsinn]

Thanks i wll try to find com port
what to enter in IP
also i found
7-N-1
VT-100
Standard EC
Xon/Xoff
Compression: Enabled
i only found vt-100 in PC plus did not found any 7 or 8N1 non xon/xof standered ec etc where are these

 

[KCFLHRC]

Default PBX IP address is 137.135.128.253 255.255.255.0. 9600 8 n 1 is typical and can be found in Procomm.

 

[gullsinn]

thanks really typical
i found them in connection directory -> data -> port settings