Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1K M & BCM50 networking - easy question 2

Status
Not open for further replies.

MefistoAplasta

Programmer
May 31, 2009
62
DO
I was using UDP between the CS1K and a BCM50 now I want to recived/send 11 digit (NPA+NXX+XXX)instead of 7 digit (LOC+DN), that's why I change the BCM to Public network intead of Private network, Now I reciving this Dchannel log:

DCH 10 IMSG SETUP REF 00008181 CH 148 0 0 0 TOD 10:43:08
CALLED #:4603366 NUM PLAN: NUM UNKNOWN/UNKNOWN (UNKNOWN)

DCH 10 OMSG REL COMP REF 00008181 CH 148 0 0 0 TOD 10:43:08
CAUSE :UNASSIGNED NUMBER
DIAG: 171

Now my question is: What I need to change in the CSK1 to work with the BCM's Public Network?

Any help would be appreciated.

Thanks in Advance.
 
Add an IDC table to your route to strip off the 460.

As long as call is tagged as unknown, it will not know to look at HLOC code.
 
It looks that there is no such number 4603366 on CS1K.
Do you have valid DN 4603366 on CS1K side. If you are using Public - then numbering plan is unknown, so LOC 460 is not valid [detected] on CS1K side.

Are you using h323 or sip IP trunks?
Are you able to make calls from CS1K to BCM?
 
Reusser, I was using this for trip off the 460 but I can't use HLOC cause Im using Public network:

ld 90
net
ac2
hloc 460
dmi 10 <-- Digit Manipulation Digit

DMI 10
DEL 3
ISPN NO
CTYP LOC

I found this parameter to add a DMI to the route, is this one that you're talking?

CNVT (NO) YES Conventional (applies only to Tie trunks)
- DDMI (0)-255 Digit Manipulation Index



smiena, My valid DN is 3366, I want to strip off the 460 in all unknown incoming call.

Thanks in Advance.

 
See example below: 4603 as incoming and only 3 as outgoing


>ld 49

REQ new
TYPE idc
CUST 0
DCNO 2
FDID
IDGT 4603

4603 3
IDGT


REQ prt
TYPE idc
CUST 0
DCNO 2

DCNO 2
IDGT CDGT
4603 3

MEM AVAIL: (U/P): 98842564 USED U P: 5306614 103235 TOT: 104252413
DISK SPACE NEEDED: 160 KBYTES
REQ end


>ld 21
PT1000

REQ: prt
TYPE: rdb
CUST 0
ROUT 1

TYPE RDB
CUST 00
ROUT 1
DES ATT_PRI
TKTP DID
M911_ANI NO
M911_TONE NO
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC NI2
CBCR NO
NCOS 0
SBN NO
PNI 00001
NCNA YES
NCRD NO
CHTY BCH
CPFXS YES
CPUB OFF
DAPC NO
BCOT 0
INTC NO
MBXR NO
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 8101
TCPP NO
PII NO
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC YES
DCNO 1 <---- IDC assigned to route day mode
NDNO 1 * <---- IDC assigned to route night mode
DEXT NO
DNAM NO
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510


PAGE 002

GRD 896
SFB 3
NBS 2048
NBL 4096
DRNG NO
CDR NO
MUS NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TDET NO
TTBL 0
ATAN NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top