CS1K is not sending CLID to Asterisk via TieLine

[minicompbx]

thread798-910063

I am having exaclty the same issue as the thread mention above.
In sum, I have installed Asterisk and it is connected to CS1K via TIELINE. Everything is working but when I call from Nortel to Asterisk extension, it show 10 digit number instead of local 4 digit DN and Name

Below is my prinout of RDB

TYPE RDB  
CUST 00 
ROUT 44 
DES  ASTERISK
TKTP TIE 
M911P NO 
ESN  NO  
CNVT NO  
SAT  NO  
RCLS INT 
VTRK NO  
DTRK YES 
BRIP NO  
DGTP PRI 
ISDN YES 
    MODE PRA 
    IFC  ESS5
    SBN  NO
    PNI  00000 
    SRVC WATB
    SRPM 0 
    NCNA YES 
    NCRD NO  
    CHTY BCH 
    CTYP UKWN
    INAC NO  
    ISAR NO  
    CPUB OFF 
    DAPC NO  
    BCOT 0 
MBXR NO  
MBXOT NPA 
MBXT 0 
DSEL VOD 
PTYP PRI 
CNDP UKWN 
AUTO NO  
DNIS NO  
DCDR NO  
ICOG IAO 
SRCH RRB 
TRMB YES 
STEP 
ACOD ****
TCPP NO  
PII NO  
AUXP NO  
TARG 
CLEN 1 
BILN NO
OABS 
INST 
IDC  NO  
DCNO 0 *
NDNO 0 
DEXT NO  
ANTK 
SIGO STD 
ICIS YES
TIMR ICF  512 
     OGF  512 
     EOD  13952 
     NRD  10112 
     DDL  70 
     ODT  4096 
     RGV  640 
     GRD  896 
     SFB  3 
     NBS  2048 
     NBL  4096 
     TFD  0 
DRNG NO  
CDR  NO  
MUS  NO  
RACD NO  
FRL  0 0 
FRL  1 0 
FRL  2 0 
FRL  3 0 
FRL  4 0 
FRL  5 0 
FRL  6 0 
FRL  7 0 
AUTH NO  
TTBL 0 
ATAN NO  
PLEV 2 
ALRM NO  
ART  0 
SGRP 0 
ARDN NO  
CTBL 0 
AACR NO

Let me know you need any more information
Thank's

Learning is not enough, you have to apply it...

 

[minicompbx]

So for few days I was running around for nothing because at the beginning, I was using ESS5 and everything was working well except when calling from Nortel to Asterisk : the asterisk set was seeing the 10 digit number instead of DN and Name.
Is there a way to config so at least I can send the 4 digit number to asterisk even though I cannot send the name? I think I have to play with CLID table to do that. What do you think?

Thank's again

Learning is not enough, you have to apply it...

 

[KCFLHRC]

From Nortel to the Asterisk yes, it would be the CLID table. I cant help you from the Asterisk to the Nortel. Sorry you wasted your time on the name thing.

 

[minicompbx]

I am really sorry for the two thread at the same time...

I just recreate the DCH with ESS5 as I did in the beginning and same way the asterisk. It is working like before

For the DN I will have to play with CLID (I might need a hand for CLID)

As we have some set with Nortel and some with Asterisk.

For example how do I create a clid that will send DN and Name to Nortel set and only dn to Asterisk ... on ld 15

Any guide will be appreciate.

Thank's

Learning is not enough, you have to apply it...

 

[jamie2]

I don't think the CLID table is looked at on a CDP type call.