Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000S SIG SERV DOESNT SHOW UP

Status
Not open for further replies.

rumelihavasi

IS-IT--Management
Dec 9, 2011
59
TR
I have a system CS100S and using element manager to install node.
I have installed the node successfully.
Transferred the node to all elements (VGMC and Signaling server)

When I do STAT SS in Call server I am able to see the VGMC but no Signalig server.
I can ping all ip addresses to all elements.

What could be the wrong?

Thanks for your help
 
 Sig Server Rls 4.50 doesnt show up in LD 117 STAT SS
Hi Tbonz25

I did softreset from elenmen manager and hard reset from the cabinet.
Technically call server receives the NODE ID. But it only stays in the pdt. When I do "STAT SS", "STAT LINK NODE 1" system gives nothing.
I assume call server receives it but doeesnt activate it.

 
Let me ask one other question you do have IP licenses correct?
 
yes we do. When I install the system I ve entered the keycode and it is accepted.

Also Signaling server and nodes doesnt have anything to do with IP license as I know
 
Can you post your Node file. Also you do have to have IP licenses or the link will not come up but after looking back at the entire post I see that you said it did show the link up.
 
Sorry rumelihavasi

Tbonz25 means node.cfg in folder /u/db/node
Follow files has to be in folder node
node.cfg , node.xml , node.pch , node.btp
you can check node.cfg with command cat node.cfg
 
Node files looks o.k. so far
How looks your Patchbase of this stone age software ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top