Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000S Question

Status
Not open for further replies.
banbdi

banbdi

IS-IT--Management
Sep 16, 2010
24
0
0
DO
Hi, guys thans for time and help
i have a question how i can send the extension name from CS1000S to Asterisk using PRI T1 Interconections?

this is my DCH Print out i test ND1 and ND2

ADAN DCH 21
CTYP TMDI
MG_CARD 000 0 04
PORT 1
DES pri
USR PRI
DCHL 23
OTBF 32
PARM RS232 DTE
DRAT 64KC
CLOK EXT
IFC ESS5
SIDE USR
CNEG 1
RLS ID **
RCAP ND2
MBGA NO
OVLR NO
OVLS NO
T200 3
T203 10
N200 3
N201 260
K 7

and what i see from cs1000s to asterisk

- Accepting call from '4839' to '1414' on channel 0/2, span 3
-- Executing [1414@from-internal:1] Macro("DAHDI/i3/4839-5", "exten-vm,novm,1414") in new stack
-- Executing [s@macro-exten-vm:1] Macro("DAHDI/i3/4839-5", "user-callerid,") in new stack
-- Executing [s@macro-user-callerid:1] Set("DAHDI/i3/4839-5", "AMPUSER=4839") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("DAHDI/i3/4839-5", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("DAHDI/i3/4839-5", "1?Set(REALCALLERIDNUM=4839)") in new stack
-- Executing [s@macro-user-callerid:4] Set("DAHDI/i3/4839-5", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:5] Set("DAHDI/i3/4839-5", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("DAHDI/i3/4839-5", "1?report") in new stack
-- Goto (macro-user-callerid,s,10)
-- Executing [s@macro-user-callerid:10] GotoIf("DAHDI/i3/4839-5", "0?continue") in new stack
-- Executing [s@macro-user-callerid:11] Set("DAHDI/i3/4839-5", "__TTL=64") in new stack
-- Executing [s@macro-user-callerid:12] GotoIf("DAHDI/i3/4839-5", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("DAHDI/i3/4839-5", "CALLERID(number)=4839") in new stack
-- Executing [s@macro-user-callerid:20] Set("DAHDI/i3/4839-5", "CALLERID(name)=") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("DAHDI/i3/4839-5", "Using CallerID "" <4839>") in new stack
-- Executing [s@macro-exten-vm:2] Set("DAHDI/i3/4839-5", "RingGroupMethod=none") in new stack
-- Executing [s@macro-exten-vm:3] Set("DAHDI/i3/4839-5", "VMBOX=novm") in new stack
-- Executing [s@macro-exten-vm:4] Set("DAHDI/i3/4839-5", "__EXTTOCALL=1414") in new stack
-- Executing [s@macro-exten-vm:5] Set("DAHDI/i3/4839-5", "CFUEXT=") in new stack
-- Executing [s@macro-exten-vm:6] Set("DAHDI/i3/4839-5", "CFBEXT=") in new stack
-- Executing [s@macro-exten-vm:7] Set("DAHDI/i3/4839-5", "RT=""") in new stack
-- Executing [s@macro-exten-vm:8] Macro("DAHDI/i3/4839-5", "record-enable,1414,IN") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("DAHDI/i3/4839-5", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("DAHDI/i3/4839-5", "recordingcheck,20150331-193116,1427844676.30") in new stack
-- Executing [s@macro-record-enable:5] MacroExit("DAHDI/i3/4839-5", "") in new stack
-- Executing [s@macro-exten-vm:9] Macro("DAHDI/i3/4839-5", "dial-one,"",tr,1414") in new stack
-- Executing [s@macro-dial-one:1] Set("DAHDI/i3/4839-5", "DEXTEN=1414") in new stack
-- Executing [s@macro-dial-one:2] Set("DAHDI/i3/4839-5", "DIALSTATUS_CW=") in new stack
-- Executing [s@macro-dial-one:3] GosubIf("DAHDI/i3/4839-5", "0?screen,1") in new stack
-- Executing [s@macro-dial-one:4] GosubIf("DAHDI/i3/4839-5", "0?cf,1") in new stack
-- Executing [s@macro-dial-one:5] GotoIf("DAHDI/i3/4839-5", "1?skip1") in new stack
-- Goto (macro-dial-one,s,8)
-- Executing [s@macro-dial-one:8] GotoIf("DAHDI/i3/4839-5", "0?nodial") in new stack
-- Executing [s@macro-dial-one:9] GotoIf("DAHDI/i3/4839-5", "0?continue") in new stack
-- Executing [s@macro-dial-one:10] Set("DAHDI/i3/4839-5", "EXTHASCW=") in new stack
-- Executing [s@macro-dial-one:11] GotoIf("DAHDI/i3/4839-5", "1?next1:cwinusebusy") in new stack
-- Goto (macro-dial-one,s,12)
-- Executing [s@macro-dial-one:12] GotoIf("DAHDI/i3/4839-5", "0?docfu:skip3") in new stack
-- Goto (macro-dial-one,s,16)
-- Executing [s@macro-dial-one:16] GotoIf("DAHDI/i3/4839-5", "1?next2:continue") in new stack
-- Goto (macro-dial-one,s,17)
-- Executing [s@macro-dial-one:17] GotoIf("DAHDI/i3/4839-5", "1?continue") in new stack
-- Goto (macro-dial-one,s,25)
-- Executing [s@macro-dial-one:25] GotoIf("DAHDI/i3/4839-5", "0?nodial") in new stack
-- Executing [s@macro-dial-one:26] GosubIf("DAHDI/i3/4839-5", "1?dstring,1:dlocal,1") in new stack
-- Executing [dstring@macro-dial-one:1] Set("DAHDI/i3/4839-5", "DSTRING=") in new stack
-- Executing [dstring@macro-dial-one:2] Set("DAHDI/i3/4839-5", "DEVICES=1414") in new stack
-- Executing [dstring@macro-dial-one:3] ExecIf("DAHDI/i3/4839-5", "0?Return()") in new stack
-- Executing [dstring@macro-dial-one:4] ExecIf("DAHDI/i3/4839-5", "0?Set(DEVICES=414)") in new stack
-- Executing [dstring@macro-dial-one:5] Set("DAHDI/i3/4839-5", "LOOPCNT=1") in new stack
-- Executing [dstring@macro-dial-one:6] Set("DAHDI/i3/4839-5", "ITER=1") in new stack
-- Executing [dstring@macro-dial-one:7] Set("DAHDI/i3/4839-5", "THISDIAL=SIP/1414") in new stack
-- Executing [dstring@macro-dial-one:8] GosubIf("DAHDI/i3/4839-5", "1?zap2dahdi,1") in new stack
-- Executing [zap2dahdi@macro-dial-one:1] ExecIf("DAHDI/i3/4839-5", "0?Return()") in new stack
-- Executing [zap2dahdi@macro-dial-one:2] Set("DAHDI/i3/4839-5", "NEWDIAL=") in new stack
-- Executing [zap2dahdi@macro-dial-one:3] Set("DAHDI/i3/4839-5", "LOOPCNT2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:4] Set("DAHDI/i3/4839-5", "ITER2=1") in new stack
-- Executing [zap2dahdi@macro-dial-one:5] Set("DAHDI/i3/4839-5", "THISPART2=SIP/1414") in new stack
-- Executing [zap2dahdi@macro-dial-one:6] ExecIf("DAHDI/i3/4839-5", "0?Set(THISPART2=DAHDI/1414)") in new stack
-- Executing [zap2dahdi@macro-dial-one:7] Set("DAHDI/i3/4839-5", "NEWDIAL=SIP/1414&") in new stack
-- Executing [zap2dahdi@macro-dial-one:8] Set("DAHDI/i3/4839-5", "ITER2=2") in new stack
-- Executing [zap2dahdi@macro-dial-one:9] GotoIf("DAHDI/i3/4839-5", "0?begin2") in new stack
-- Executing [zap2dahdi@macro-dial-one:10] Set("DAHDI/i3/4839-5", "THISDIAL=SIP/1414") in new stack
-- Executing [zap2dahdi@macro-dial-one:11] Return("DAHDI/i3/4839-5", "") in new stack
-- Executing [dstring@macro-dial-one:9] Set("DAHDI/i3/4839-5", "DSTRING=SIP/1414&") in new stack
-- Executing [dstring@macro-dial-one:10] Set("DAHDI/i3/4839-5", "ITER=2") in new stack
-- Executing [dstring@macro-dial-one:11] GotoIf("DAHDI/i3/4839-5", "0?begin") in new stack
-- Executing [dstring@macro-dial-one:12] Set("DAHDI/i3/4839-5", "DSTRING=SIP/1414") in new stack
-- Executing [dstring@macro-dial-one:13] Return("DAHDI/i3/4839-5", "") in new stack
-- Executing [s@macro-dial-one:27] GotoIf("DAHDI/i3/4839-5", "0?nodial") in new stack
-- Executing [s@macro-dial-one:28] GotoIf("DAHDI/i3/4839-5", "0?skiptrace") in new stack
-- Executing [s@macro-dial-one:29] GosubIf("DAHDI/i3/4839-5", "1?ctset,1:ctclear,1") in new stack
-- Executing [ctset@macro-dial-one:1] Set("DAHDI/i3/4839-5", "DB(CALLTRACE/1414)=4839") in new stack
-- Executing [ctset@macro-dial-one:2] Return("DAHDI/i3/4839-5", "") in new stack
-- Executing [s@macro-dial-one:30] Set("DAHDI/i3/4839-5", "D_OPTIONS=tr") in new stack
-- Executing [s@macro-dial-one:31] ExecIf("DAHDI/i3/4839-5", "0?SIPAddHeader(Alert-Info: )") in new stack
-- Executing [s@macro-dial-one:32] ExecIf("DAHDI/i3/4839-5", "0?SIPAddHeader()") in new stack
-- Executing [s@macro-dial-one:33] ExecIf("DAHDI/i3/4839-5", "0?Set(CHANNEL(musicclass)=)") in new stack
-- Executing [s@macro-dial-one:34] GosubIf("DAHDI/i3/4839-5", "0?qwait,1") in new stack
-- Executing [s@macro-dial-one:35] Set("DAHDI/i3/4839-5", "__CWIGNORE=") in new stack
-- Executing [s@macro-dial-one:36] Set("DAHDI/i3/4839-5", "__KEEPCID=TRUE") in new stack
-- Executing [s@macro-dial-one:37] Dial("DAHDI/i3/4839-5", "SIP/1414,"",tr") in new stack

 
Sort by date Sort by votes
I would use Qsig if your cs1000 is packaged with it... LD 22 / PRT PKG
 
Upvote 0 Downvote
I would think that Calling Party Name Display over trunks will work only on MCDN,DPNSS and QSIG however Asterix would probably not accept "MCDN" or DPNSS. So I think Jamie2 is correct, your D-channel is set up for ESS5 and probably not support CPND, can you run QSIG instead.

Maybe you used " thats why you programmet ESS5? But that cant be correct,

Try IFC ISGF instead if Asterix support it (below sample from M1(CS1000) - CUCM




/Tor
 
Upvote 0 Downvote
ok, thanks for your time and help!
 
Upvote 0 Downvote
I agree that QSIG would be the way you would want to build your PRI between the two to pass your info

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Avaya IP Office, Mitel 3300 Basic & Advanced, 5000, SX200, NuPoint
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

PaulMcGuinness
  • Locked
  • Question
CS1000S Complete Password/System reset 1
Replies
13
Views
175
bignose21
bignose21
SherWat
  • Question
Clocking question 1
Replies
5
Views
569
bignose21
bignose21
tipnring1234
  • Locked
  • Question
GH Trout question
Replies
0
Views
57
tipnring1234
tipnring1234
twlcolorado
  • Locked
  • Question
Second SIP call between two CS1000s fails
Replies
0
Views
29
twlcolorado
twlcolorado
azrael2000
  • Locked
  • Question
Meridian mail question
Replies
2
Views
67
busytone
busytone

Part and Inventory Search

Sponsor

Back
Top