cs1000m h323 trunking with bcm50

[Aerodesliza]

how can i setup the h323 trunking with a bcm50? i created the spn=70 using the h323 route but i don't know how to setup the nrs table in the cs1000m's web manager, any help is appreciated.

 

[Aerodesliza]

any help?

 

[Avaya911PLM]

Go to

http://nortel.com

and do a search on NN43001-326

This document will tell you everything you need to know.

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast

 

[pronei]

Make sure your BCM is registered as an endpoint in your NRS. In the BCM config when defining the proxy name make sure the field has NAME:xxxx (where xxxx is whatever you named your BCM endpoint in your NRS. If NAME: is not present, it will not register.

*** I think it's NAME: , been awhile since I've had to config a BCM50 on H323.