Hi everyone,
I am currently installing a sip trunk between my cs1k v6.0 and my bcm 50. The BCM endpoint has successfully registered with the gateway but the cs1000 endpoint for some reason is unable to do so. I have checked endpoints names and passwords and they all match. Everything else seems ok, I guess untill I can have it registered, theres nothing else I can do. Here is what I have as the output for SipGwShow Command :
SIPNPM Status : Active
Primary Proxy IP address : 192.168.20.10
Primary Proxy port : 5060
Primary Proxy Transport : TCP
Secondary Proxy IP address : 0.0.0.0
Secondary Proxy port : 5060
Secondary Proxy Transport : UDP
Active Proxy : Primary :Not Registered
Time To Next Registration : 5 Seconds
Channels Busy / Idle / Total : 0 / 4 / 4
Stack version : 4.0.0.30
TLS Security Policy : Security Disabled
SIP Gw Registration Trace : OFF
Output Type Used : RPT
Channel tracing : -1
NRS settings :
Server Configuration
Host name cs1000
Primary TLAN IP address 192.168.20.10
Secondary TLAN IP address 0.0.0.0
Secondary server host name cs1000
Control priority 40
Server mate communication port 1720
Realm name cs1000
Server role Primary
H.323 Gatekeeper Settings
Location request (LRQ) response timeout 3
SIP Server Settings
Public name for non-trusted networks cs1000
Public number for non-trusted networks 000-000
UDP Transport enabled
Primary server UDP IP 192.168.20.10
Primary server UDP port 5060
Secondary server UDP IP 0.0.0.0
Secondary server UDP port 5060
TCP Transport enabled
Primary server TCP IP 192.168.20.10
Primary server TCP port 5060
Secondary server TCP IP 0.0.0.0
Secondary server TCP port 5060
TLS Transport enabled
Primary server TLS IP 192.168.20.10
Primary server TLS port 5061
Secondary server TLS IP 0.0.0.0
Secondary server TLS port 5061
Transport Layer Security (TLS) Settings
Maximum session cache 2048000
Session cache timeout 600
Renegotiation in byte 2048000
X509 Certificate authentication
Client authentication
Network Connection Server (NCS) Settings
Primary NCS port 16500
Secondary NCS port 16500
Primary NCS timeout 10
What would you check first, aside the endpoints names in NRS or Node config ? Im lost..
Thanks !
I am currently installing a sip trunk between my cs1k v6.0 and my bcm 50. The BCM endpoint has successfully registered with the gateway but the cs1000 endpoint for some reason is unable to do so. I have checked endpoints names and passwords and they all match. Everything else seems ok, I guess untill I can have it registered, theres nothing else I can do. Here is what I have as the output for SipGwShow Command :
SIPNPM Status : Active
Primary Proxy IP address : 192.168.20.10
Primary Proxy port : 5060
Primary Proxy Transport : TCP
Secondary Proxy IP address : 0.0.0.0
Secondary Proxy port : 5060
Secondary Proxy Transport : UDP
Active Proxy : Primary :Not Registered
Time To Next Registration : 5 Seconds
Channels Busy / Idle / Total : 0 / 4 / 4
Stack version : 4.0.0.30
TLS Security Policy : Security Disabled
SIP Gw Registration Trace : OFF
Output Type Used : RPT
Channel tracing : -1
NRS settings :
Server Configuration
Host name cs1000
Primary TLAN IP address 192.168.20.10
Secondary TLAN IP address 0.0.0.0
Secondary server host name cs1000
Control priority 40
Server mate communication port 1720
Realm name cs1000
Server role Primary
H.323 Gatekeeper Settings
Location request (LRQ) response timeout 3
SIP Server Settings
Public name for non-trusted networks cs1000
Public number for non-trusted networks 000-000
UDP Transport enabled
Primary server UDP IP 192.168.20.10
Primary server UDP port 5060
Secondary server UDP IP 0.0.0.0
Secondary server UDP port 5060
TCP Transport enabled
Primary server TCP IP 192.168.20.10
Primary server TCP port 5060
Secondary server TCP IP 0.0.0.0
Secondary server TCP port 5060
TLS Transport enabled
Primary server TLS IP 192.168.20.10
Primary server TLS port 5061
Secondary server TLS IP 0.0.0.0
Secondary server TLS port 5061
Transport Layer Security (TLS) Settings
Maximum session cache 2048000
Session cache timeout 600
Renegotiation in byte 2048000
X509 Certificate authentication
Client authentication
Network Connection Server (NCS) Settings
Primary NCS port 16500
Secondary NCS port 16500
Primary NCS timeout 10
What would you check first, aside the endpoints names in NRS or Node config ? Im lost..
Thanks !