CS1000E R6 CPPM CoRes, new UTM E1/T1 PRI card

[Harlock1]

I installed a CoRes R6 system and was given a new UTM E1/T1 card with clock controller.

I can't get the d-channel up.

My config is as follow:
MG slot4 - -
MG slot3 - UTM E1/T1
MG slot2 - -
MG slot1 - CPPM CoRes
MG slot0 - MGC Card (registered as 004 00)

I added the PRI under LD 17
I want to confirm that when asked for the:
"MG_CARD supl sh slot"
info, I enter the MGC number (4) shelf (0) slot (3)?
And under LD 14
I added a NEW TYPE tie
When asked for the "TN loop channel" is that "TN 3 0"?
And lastly under LD 73
FEAT syti
"MGCLK supl sh slot" is this "4 0 3" or " 0 0 3"?

I'm not sure if I have the PRI associated correctly with the MGC card, I have 96 DSP's and IPMG 04 00 in main MG.

Can someone explain the supl sh slot mappings and help me get the d-channel up.

Thanks

 

[M1spezi]

The TN for the PRI is a virtual Loop, also the TN for the channels .The clock is 4 0 3

For example


ADAN DCH 202
CTYP MSDL
MG_CARD 004 0 03
PORT 1
DES L_202_ICT
USR PRI
DCHL 202
OTBF 80
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC EURO
CNTY GER
PINX_CUST 0
ISDN_MCNT 300
CLID OPT1
PROG NCHG
CO_TYPE STD
SIDE USR
CNEG 2
RLS ID **
RCAP COLP
MBGA NO
OVLR YES
DIDD 3
OVLS YES
OVLT 0
T310 120
INC_T306 2
OUT_T306 20
T200 2
T203 20
N200 3
N201 260
K 7


>ld 22

PT2000

REQ prt
TYPE cequ
PRI2 MG_CARD
202 004 0 03

>ld 73
REQ prt

TYPE pri2
FEAT syti
MGCLK 4 0 3
PREF 4 0 3
CCGD 15
CCAR 15
EFCS YES

>ld 20
PT0000
REQ: prt
TYPE: tn
TYPE TNB
TN 202 1

DES 202_ICT
TN 202 01 VIRTUAL
TYPE DID
CDEN SD
CUST 0
TRK PRI2
PDCA 2
PCML A
NCOS 7
RTMB 3 1
B-CHANNEL SIGNALING
NITE
AST NO
IAPG 0
CLS UNR DTN CND ECD WTA LPR APN THFD SPCD
P10 VNL
TKID
DTCR NO
AACR NO
DATE NO DATE

Meridian, Callpilot, CCM (Symposium) from Germany

 

[Harlock1]

Ok, so my superloop for the PRI will always be the virtual superloop I assigned to the MGC Card?

My d-channel is "red" and under LD 60 stat dch
I get MBUSY on the first timeslot only.

I'll do a dump on monday if you don't mind looking at it for me.

I need the following:
MG1000, shelf 0
MGC in slot 0, configured as IPMG currently
PRI in slot 3

IFC sl1
TYPE tie

Do you mind giving me printout of LD 17, 14, 16 configs you have? How is the digital trunks added? B-Channels?

Regards,

 

[M1spezi]

OK. LD 17 you have to create a virtual SUPL for example 206 (or,what ever you want).

LD 14 you create 30 Channels

LD 14
REQ:new 30
Type: TIE
TN 206 1
Des...

The next is a example of a german DID not TIE !




ld 22
PT2000
REQ prt
TYPE adan dch
ADAN DCH 206
CTYP MSDL
MG_CARD 004 0 03
PORT 1
DES Loop_206
USR PRI
DCHL 206
OTBF 80
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC EURO
CNTY GER
PINX_CUST 0
ISDN_MCNT 300
CLID OPT1
PROG NCHG
CO_TYPE STD
SIDE USR
CNEG 2
RLS ID **
RCAP COLP
MBGA NO
OVLR YES
DIDD 6
OVLS YES
OVLT 0
T310 120
INC_T306 2
OUT_T306 20
T200 2
T203 20
N200 3
N201 260
K 7



>ld 22


REQ prt
TYPE cequ
CEQU
SUPL V004 N096 N112 V148
V160 V192
SUPC
SUPF
DDCS MG_CARD
XCT
CONF
MGTDS IPMG IPMG_TYPE
128 004 0 MGC
MGCONF IPMG PORTS IPMG_TYPE
129 004 0 30 MGC
MFSD * 128
PRI2 MG_CARD
206 004 0 03

DTI2 MG_CARD
MISP MG_CARD
SYNM 0
EXT0 3PE
EXT1 3PE
MCFN 006 MB

REQ end

>ld 73

DDB000
MEM AVAIL: (U/P): 98085481 USED U P: 5379080 187788 TOT: 103652349
DISK SPACE NEEDED: 308 KBYTES
REQ prt

TYPE pri2

FEAT syti
MGCLK 4 0 3
PREF 4 0 3
SREF
CCGD 15
CCAR 15
EFCS YES

MEM AVAIL: (U/P): 98085481 USED U P: 5379080 187788 TOT: 103652349
DISK SPACE NEEDED: 308 KBYTES
REQ end
>ld 21
PT1000
TYPE RDB
CUST 00
ROUT 7
DES IAO
TKTP DID
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI2
ISDN YES
MODE PRA
IFC EURO
CNTY GER
SBN NO
PNI 00001
NCNA NO
NCRD NO
ISAR NO
CPFXS YES
SDID NO
DAPC YES
TBL 1
INTC NO
MBXR NO
DSEL VOD
PTYP DCO
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 9290007
TCPP NO
PII NO
AUXP NO
TARG
CLEN 1
BILN NO
OABS
INST 7
IDC YES
DCNO 7
NDNO 7 *
DEXT NO
DNAM NO
MFC NO
ICIS YES
OGIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GTO 896
GTI 896
SFB 3
NBS 2048
NBL 4096
IENB 5
VSS 0
VGD 6
DTD NO
SCDT NO
2 DT NO
DDO NO
DRNG NO
CDR YES
INC NO
LAST YES
QREC YES
OAL YES
AIA YES
OAN NO
OPD YES
NDP EXC 0
CCO NO
NATL YES
SSL
CFWR NO
IDOP NO
VRAT NO
MUS YES
MRT 20
MR DURC
DSPD NO
PANS YES
RACD NO
RUCS 0
RURC 0 0
RUCF 1 0
MULT NO
DSPT 10
EQAR NO
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4
FRL 5 5
FRL 6 6
FRL 7 7
OHQ NO
OHQT 00
TTBL 0
ATAN NO
PLEV 2
OPR NO
PRDL NO
EOS NO
DNSZ 0
RCAL NO
MCTS NO
ALRM NO
BTT 30
ACKW NO
ART 1
PECL NO
DCTI 0
TIDY 9290007 7
SGRP 0
ARDN NO
AACR NO

>ld 60

SL-1 --- SYS-12/AXE-10 SWE/NUMERIS/SWISS/TCNZ
/EUROISDN/SING/THAI/MSIA/INDO/CHNA
/INDI/PHLP
CHANNEL TIMESLOT MAPPING

SL-1 NETWORK TIMESLOT
B-CHANNEL 1 -15 1 -15 1 -15
16-30 17-31 17-31
D-CHANNEL 31 16 16
stat 206
PRI2 LOOP 206 - ENBL
REF CLK: ENBL
TRACKING
SERVICE RESTORE: YES
ALARM STATUS: ACCEPTABLE
CH 01 - IDLE DID VOD * CH 02 - IDLE DID VOD
CH 03 - IDLE DID VOD * CH 04 - IDLE DID VOD *
CH 05 - IDLE DID VOD * CH 06 - IDLE DID VOD *
CH 07 - IDLE DID VOD * CH 08 - IDLE DID VOD *
CH 09 - IDLE DID VOD * CH 10 - IDLE DID VOD *
CH 11 - IDLE DID VOD * CH 12 - IDLE DID VOD *
CH 13 - IDLE DID VOD * CH 14 - IDLE DID VOD *
CH 15 - IDLE DID VOD * CH 16 - IDLE DID VOD *
CH 17 - IDLE DID VOD * CH 18 - IDLE DID VOD *
CH 19 - IDLE DID VOD * CH 20 - IDLE DID VOD *
CH 21 - IDLE DID VOD * CH 22 - IDLE DID VOD *
CH 23 - IDLE DID VOD * CH 24 - IDLE DID VOD *
CH 25 - IDLE DID VOD * CH 26 - IDLE DID VOD *
CH 27 - IDLE DID VOD * CH 28 - IDLE DID VOD *
CH 29 - IDLE DID VOD * CH 30 - IDLE DID VOD *
CH 31 - DCH 206
.***





Meridian, Callpilot, CCM (Symposium) from Germany

 

[Harlock1]

Thanks, I got it working, d-channel that is.
Battling with a few other things now, but will do a separate post.