CS1000E 5.5 TTY

[jjmcneil]

Can anyone clue me in on how to disable and remove an MGC TTY on port 0. All I get is an IOD002 when trying to disable it.

Thanks in advance!

 

[KCFLHRC]

Post a print out of the tty, usually pretty straight forward stuff.

 

[KCFLHRC]

Here is one I just built, enabled ti, disabled it and then outed it

DCH AVAIL: 253 USED: 2 TOT: 255
AML AVAIL: 15 USED: 1 TOT: 16
REQ chg
TYPE adan
ADAN new tty 4
CTYP mgc
IPMG 4 0
PORT 0
DNUM 04
DES test
BPS
BITL
STOP
PARY
FLOW
USER

SCH5549

USER mtc sch bug
TTYLOG
BANR

MEM AVAIL: (U/P): 98849752 USED U P: 5317470 102599 TOT: 104269821
SCH5066

DCH AVAIL: 253 USED: 2 TOT: 255
AML AVAIL: 15 USED: 1 TOT: 16

ADAN DATA SAVED
ADAN

REQ end


>ld 37
IOD000
.stat

TTY 0 : ENBL
TTY 1 : DSBL ( MGC 0 0 )
TTY 2 : DSBL ( MGC 0 0 )
TTY 3 : ENBL DES: TTY3
TTY 4 : DSBL ( MGC 4 0 ) DES: test
TTY 6 : DSBL
TTY 7 : DSBL DES: PTY
.enl tty 4
OK
.stat

TTY 0 : ENBL
TTY 1 : DSBL ( MGC 0 0 )
TTY 2 : DSBL ( MGC 0 0 )
TTY 3 : ENBL DES: TTY3
TTY 4 : ENBL ( MGC 4 0 ) DES: test
TTY 6 : DSBL
TTY 7 : DSBL DES: PTY
.dis tty 4

.****
OVL000
>ld 17
CFN000
MEM AVAIL: (U/P): 98849752 USED U P: 5317470 102599 TOT: 104269821
SCH5066

DCH AVAIL: 253 USED: 2 TOT: 255
AML AVAIL: 15 USED: 1 TOT: 16
REQ chg
TYPE adan
ADAN out tty 4

MEM AVAIL: (U/P): 98849844 USED U P: 5317418 102559 TOT: 104269821
SCH5066

DCH AVAIL: 253 USED: 2 TOT: 255
AML AVAIL: 15 USED: 1 TOT: 16

ADAN DATA REMOVED
ADAN

REQ end

 

[jjmcneil]

I would have thought it was that easy but...

REQ prt
TYPE adan tty 1

ADAN TTY 1
CTYP MGC
IPMG 4 0
DNUM 1
PORT 0
DES seb1
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER MTC SCH MCT BUG
XSM NO
TTYLOG 0
BANR YES

REQ end
>ld 37

.stat tty

TTY 0 : ENBL ( MGC 8 0 ) DES: SEB
TTY 1 : ENBL ( MGC 4 0 ) DES: seb1
TTY 2 : ENBL ( MGC 8 1 ) DES: SEBMDM
TTY 4 : ENBL
TTY 5 : ENBL
TTY 10 : ENBL ( MGC 8 0 ) DES: XIOX
TTY 13 : DSBL DES: TTY13
TTY 14 : DSBL DES: TTY14
TTY 15 : ENBL DES: TTY15
.dis tty 2


IOD002


.

...all I get is IOD002 (invalid argument)

 

[KCFLHRC]

You printed TTY 1 but your are trying to out TTY 2 ????

 

[jjmcneil]

Picky Picky ...I did figure out removing MCT from USER will let me disable and remove the TTY, but, if I rebuild it I get an IOD006 when trying to enable it. Seems there may be something more than just TTY programming issue going on here.

>ld 37

.stat tty

TTY 0 : ENBL ( MGC 8 0 ) DES: SEB
TTY 1 : ENBL ( MGC 4 0 ) DES: seb1
TTY 2 : ENBL ( MGC 8 1 ) DES: SEBMDM
TTY 4 : ENBL
TTY 5 : ENBL
TTY 10 : ENBL ( MGC 8 0 ) DES: XIOX
TTY 13 : DSBL DES: TTY13
TTY 14 : DSBL DES: TTY14
TTY 15 : ENBL DES: TTY15
.dis tty 1


IOD002


.

 

[KCFLHRC]

MCT, Malicious Call Trace, is suppose to have a dedicated TTY port