CS1000

[JoeBuck]

CS1000, we have 7998 as an access code for analog lines to dial long distance. This code is not working. Is there a way to verify this code or what is the CLS for analog lines to enable the ability for a long distance call

 

[Firebird Scrambler]

It might be that the ACOD 7998 route that it's assigned with has a TARG of 1 or 2 etc. Your phone may also have a TGAR of 1 or 2 etc. If it does then this maight prevent you from being able to dial the ACOD.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[JoeBuck]

DES HOSP
TN 011 0 00 02
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 6203 0 MARP
CPND
NAME Patient Room 203
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 3
LDN NO
NCOS 3
SGRP 0
RNPG 100
XLST
SCI 0
CLS CTD DTN FBD XFA WTA THFD FNA HTD ONS
LPR XRA AGRD CWD SWD PUD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUA DPUA CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD
USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
CDMR
RCO 0
PLEV 02
CSDN
AACS NO
MLWU_LANG 0
FTR FDN 6702
DATE 9 NOV 2010

 

[terrysdavid]

Print the route which has ACOD 7998.
Check to make sure that TARG is not set to 3.

 

[JoeBuck]

How do I print that route?

 

[terrysdavid]

ld 21
req prt
type rdb
route <--------if you know the number (if not leave blank and it will print all your routes)

Look for the one with acod 7998

 

[JoeBuck]

I printed the entire list and there was no record of ACOD 7998? This was the closet that at least the description would compare?

TYPE RDB
CUST 00
DMOD
ROUT 7
DES PATIENT_OUTDIAL
TKTP DID
NPID_TBL_NUM 0
SAT NO
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP DTI
DSEL VOD
PTYP DCO
AUTO NO
DNIS NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 7707
CPP NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
TIMR ICF 512
OGF 512
EOD 13952


PAGE 009

DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS YES
MRT 10
MR NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
ATAN NO
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
ARDN NO
AACR NO

 

[terrysdavid]

In ld 11

req prt
type dnb
dn 7998

to see what 7998 is?

 

[Pir8Radio]

You sure it was an ACOD? and not 7, 998?

 

[Pir8Radio]

Disreguard, didnt see you had 7XXX acod already in there..

 

[JoeBuck]

DN 7998
TYPE ACDN

 

[DocVic]

Hey Joe, sound like you need a little help with your system. You might want to call your local Nortel Vendor and have them come in to get you going. I'm not saying you don't know what you're doing, but you're real close. Get some help so your patients can dial ONE DIGIT to make a call. Not FOUR!

DocVic
Dedicated to Nortel Products till the end.
Need help?

http://www.TSS-CO.com

 

[Pir8Radio]

Im a bit curious what they were doing...

ld 23
prt
acd
7998

 

[JoeBuck]

We do have support. I will call them. I was hoping for a simple fix. I appreciate all your support!!!

 

[bhassell2000]

did you prt the acdn in ld 23?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/pub/buddy-hassell/7/5a5/b8b

 

[nortelvoip256]

Are you using Hospitality Software and is the room checked in ?

 

[JoeBuck]

come to find out that when the Local telco switched our incoming line to fiber, their new equipment had a long distance access code assigned. It was on the phone company end not ours.