CS1000 to IP Office passing CLID on analog trunks

[mikethephoneguy]

I was told this is not possible, we have a very frugal customer that wants to use existing trunking to their new IP office.

 

[KCFLHRC]

Not sure I understand the question. The CS1000 will not do caller ID over analog trunks, it has to be a PRI. I have no idea about an IPO, maybe ask on that forum.

Are you talking about connecting the IPO to the CS1K over analog ports?

 

[PERRYPJ]

Pigs will fly before that happens on Analog trunks

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[biv343]

IPO will provide caller ID on analog trunks assuming its sent by the provider and you have the line type set to accept incoming caller ID. It does delay presentation of the call to the internal phones until the second ring when caller ID is received.

If you're trying to use analog station ports off an IPO connecting to analog trunk ports on the CS1K (I hope thats not what they want to do), then you will get nothing in either direction.

 

[KCFLHRC]

Yeah, I think we need a little more info