CS1000 Rel 6 - Help with CS registration

[hungnnb]

Hello everyone,
Currently I have a CS 1000E system in my lab with IBM COTS and CPPM CS. I tried with release 6.0. I set up Primary Security server on COTS, can deploy EM + SS on it. But when I go to EM to create Node, I can not transfer. When I go to CS, use LD 117 > REG UCM SYS and follow the steps, the CS can not join in the Security domain. It said that the request to join in security domain was denied, though I key in the correct password for admin in UCM.
Is it true that I missing something with the new security feature in Rel 6? I'm very appreciate any idea to get me out of this issue.
Thanks.

 

[nrsman]

Try using the nortel login and password and register ucm device.



****

 

[hungnnb]

I tried with nortel account, but it says that don't have permission. In UCM, I also map admin account with all the rights
Thanks for your input.

 

[Jeffnortel]

You must have run the security config in UCM or you wouldn't have the admin password set, correct? I've had a little trouble with this also. Try it several time in a row. Use "REGISTER UCMSECURITY SYSTEM" command. Your login is case sensitive. I type admin in lowercase. Reboot everything if it doesn't work or change your admin password.

Hope this helps

 

[hungnnb]

Hello Jeffnortel,
What do you mean by "You must have run the security config"? I think I have trouble with this, because I have the correct admin password. I tried reboot many times and change the admin password but it doesn't work.
Thanks a lot.

 

[Jeffnortel]

When u login to ucm the first time u use the nortel or root login. U must run the security config to set your cots server as the primary security server. This is when u define the admin password. Then you will be able to registeer the cs.

 

[hungnnb]

Many thanks to Jeffnortel.
Today I can do it. Just change the admin password and join in security domain so easy.
I got the password from another guy with ! at the end, and I think there's a bug with this kind of password.
Thanks again and wish all of you success !

 

[bigindian65]

there is a documented problem with using a bang on 6.0

Mato' Was'aka