Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000 Rel 6 - Help with CS registration

Status
Not open for further replies.

hungnnb

Vendor
Nov 14, 2009
17
VN
Hello everyone,
Currently I have a CS 1000E system in my lab with IBM COTS and CPPM CS. I tried with release 6.0. I set up Primary Security server on COTS, can deploy EM + SS on it. But when I go to EM to create Node, I can not transfer. When I go to CS, use LD 117 > REG UCM SYS and follow the steps, the CS can not join in the Security domain. It said that the request to join in security domain was denied, though I key in the correct password for admin in UCM.
Is it true that I missing something with the new security feature in Rel 6? I'm very appreciate any idea to get me out of this issue.
Thanks.
 
Try using the nortel login and password and register ucm device.



****
 
I tried with nortel account, but it says that don't have permission. In UCM, I also map admin account with all the rights
Thanks for your input.
 
You must have run the security config in UCM or you wouldn't have the admin password set, correct? I've had a little trouble with this also. Try it several time in a row. Use "REGISTER UCMSECURITY SYSTEM" command. Your login is case sensitive. I type admin in lowercase. Reboot everything if it doesn't work or change your admin password.

Hope this helps
 
Hello Jeffnortel,
What do you mean by "You must have run the security config"? I think I have trouble with this, because I have the correct admin password. I tried reboot many times and change the admin password but it doesn't work.
Thanks a lot.
 
When u login to ucm the first time u use the nortel or root login. U must run the security config to set your cots server as the primary security server. This is when u define the admin password. Then you will be able to registeer the cs.
 
Many thanks to Jeffnortel.
Today I can do it. Just change the admin password and join in security domain so easy.
I got the password from another guy with ! at the end, and I think there's a bug with this kind of password.
Thanks again and wish all of you success !
 
there is a documented problem with using a bang on 6.0

Mato' Was'aka
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top