CS1000 deleting channel on PRI 3

[phoneguy73]

Need help with removing channels on a Pri Circuit.Customer has limited experiance and has asked for help. Have worked on severals PBX but not the CS 1000 option 11. Older switch

 

[bhassell2000]

I would print the config in ld 20 before outing


to delete a channel, go to LD 14
req out
type tie or did or what ever it is built as
tn x x x x

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[phoneguy73]

Thanks I will give this a try.
Larry

 

[cmassjohn]

Probably need to disable the channel in LD 60 first using the dsch command.



Senior Engineer, cmass

http://www.cmass-ni.com

 

[phoneguy73]

Thanks for that information too.
Larry

 

[rain78]

Dont think you can out a channel without disabling the loop and associated dchannel first.

 

[phoneguy73]

Thanks

 

[phoneguy73]

what sets do I take to turn down the loop and D channel.

 

[bhassell2000]

ld 96
dis dch x

ld 60
disl x

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[phoneguy73]

Now how about turning up the Pri and D channel.

 

[bhassell2000]

ld 60

enll x

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[phoneguy73]

Great Thanks
Larry