Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000 connection to BCM

Status
Not open for further replies.

Sennback

Vendor
Dec 13, 2002
333
SE
Is the CS1000 configuration towards a BCM just like any other network to a CS1000?

Does anyone know what needs to be done in the BCM?

 
It all depends on how you are trying to connect to a BCM.
Can you share a little more information?

****
 
Ok, We have a CS1000E that is controling the Network here (NRS). Now we should connect to one BCM over the IP network.
We know that the CS1000E system has what it takes, but I have never been working with BCMs.

So, basically, do I set up the BCM as an Endpoint in the network just like another CS1000 or is something different?

I also need information what the BCM engineers might need to be able to set up the CS1000 as an endpoint.
(Node IP, numberingplan..)

There is a 2 Mb leased line between the sites.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top