May 19, 2010 #1 OPASIT IS-IT--Management Apr 30, 2008 36 US Is there a load i can go into and make the change?
May 19, 2010 #2 bigindian65 Technical User Dec 27, 2006 4,597 US The CLID you send out? Entry 0 is default on sets unless you have added more entries and used them. LD 15 Net_Data Mato' Was'aka Upvote 0 Downvote
The CLID you send out? Entry 0 is default on sets unless you have added more entries and used them. LD 15 Net_Data Mato' Was'aka
May 19, 2010 #3 GHTROUT IS-IT--Management Nov 25, 2005 7,915 US Here is the detailed guide: http://www.ghtrout.com/ghtrout/files/CLID_Documentation_from_Nortel.zip [©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too Upvote 0 Downvote
Here is the detailed guide: http://www.ghtrout.com/ghtrout/files/CLID_Documentation_from_Nortel.zip [©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
May 19, 2010 Thread starter #4 OPASIT IS-IT--Management Apr 30, 2008 36 US Well I was looking through the zipped files... how do i change the NATL and INTL numbers for this output? PT0000 REQ: prt TYPE: clidver SORTBY tn ESAONLY no SHORT yes TN 62 15 DATE PAGE DES TN KEY DN ZN CTYP CLID RT CALLED# 062 0 00 15 00 SCR 8452 001 911 C 8452 000 911 NATL xxxxxxxxxx INTL xxxxxxxxxx UDP 8452 CDP 8452 062 0 00 15 01 SCN 7452 001 911 C 7452 000 911 NATL xxxxxxxxxx INTL xxxxxxxxxx UDP 7452 CDP 7452 Upvote 0 Downvote
Well I was looking through the zipped files... how do i change the NATL and INTL numbers for this output? PT0000 REQ: prt TYPE: clidver SORTBY tn ESAONLY no SHORT yes TN 62 15 DATE PAGE DES TN KEY DN ZN CTYP CLID RT CALLED# 062 0 00 15 00 SCR 8452 001 911 C 8452 000 911 NATL xxxxxxxxxx INTL xxxxxxxxxx UDP 8452 CDP 8452 062 0 00 15 01 SCN 7452 001 911 C 7452 000 911 NATL xxxxxxxxxx INTL xxxxxxxxxx UDP 7452 CDP 7452
May 21, 2010 Thread starter #5 OPASIT IS-IT--Management Apr 30, 2008 36 US Anyone have any idea?? Should I change the thread? Upvote 0 Downvote
May 21, 2010 #6 GHTROUT IS-IT--Management Nov 25, 2005 7,915 US Print the CLID Tables out. That's where the work is done. [©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too Upvote 0 Downvote
Print the CLID Tables out. That's where the work is done. [©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
May 21, 2010 Thread starter #7 OPASIT IS-IT--Management Apr 30, 2008 36 US So... ld 11 chg i2002 62 15 then i get stuck Upvote 0 Downvote
May 21, 2010 1 #8 bhassell2000 Technical User Jul 28, 2009 1,658 US LD 21 prt clid Thanks, Buddy Upvote 0 Downvote
May 21, 2010 Thread starter #9 OPASIT IS-IT--Management Apr 30, 2008 36 US I get this ... both are right I just need to mod the TN 62 15 to reflect the other entry CUST 0 SIZE 256 RNGE INTL ENTRY 0 HNTN ESA_HLCL ESA_INHN NO ESA_APDN YES HLCL 4xx345x2x2 DIDN NO HLOC LSC CLASS_FMT DN ENTRY 1 HNTN ESA_HLCL ESA_INHN NO ESA_APDN YES HLCL 4xx345x6x6 DIDN NO HLOC LSC CLASS_FMT DN Upvote 0 Downvote
I get this ... both are right I just need to mod the TN 62 15 to reflect the other entry CUST 0 SIZE 256 RNGE INTL ENTRY 0 HNTN ESA_HLCL ESA_INHN NO ESA_APDN YES HLCL 4xx345x2x2 DIDN NO HLOC LSC CLASS_FMT DN ENTRY 1 HNTN ESA_HLCL ESA_INHN NO ESA_APDN YES HLCL 4xx345x6x6 DIDN NO HLOC LSC CLASS_FMT DN
May 21, 2010 #10 bhassell2000 Technical User Jul 28, 2009 1,658 US chg the set, when you get to the key 0 key 0 scr XXXX C the C is the clid entry it will pass Thanks, Buddy Upvote 0 Downvote
chg the set, when you get to the key 0 key 0 scr XXXX C the C is the clid entry it will pass Thanks, Buddy
May 24, 2010 #11 pointedout Technical User Apr 6, 2010 45 PK change DIDN to YES (LD 15) if you want your DN to be passed as well after HLCL Prefix, otherwise only HLCL entry will be passed... My Experience... Upvote 0 Downvote
change DIDN to YES (LD 15) if you want your DN to be passed as well after HLCL Prefix, otherwise only HLCL entry will be passed... My Experience...