Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000 7.5, does EDD write over the deplist and does database replication push the deplist?

Status
Not open for further replies.

phonetek808

Vendor
May 31, 2005
60
US
Quick question, if I load the current Deplist onto Core 0, will an EDD write them over to Core 1?

And then after that's completed, if I manually push a database replication to my Survivable Media Gateways, will it include the Deplist from Core0/Core 1?

Thanks in advance......
 
ON an HA system (Core0/Core1) you can load the deplist on the active core and it will sync to the inactive core.

Deplists, Loadware and Firmware do NOT relicate. Those have to be loaded to the SMG independent of the Main Site.

so load the SMG site with a default database. Load all your patches. Then in the Main site perform a datadump (remember to datadump as the replication process sends over the reten.bkp file and not the current file in flash.) then push the database over. Then configure your SMG signaling server, save and sync and you are done.

But short answer is NO, deplists don't replicate

Hope this helps.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top