CS 1000E rls 5.5 Expansion Cabinet

[lexer]

Hi

I've got a CS1000E 5.5 with CPPM (option cabinet), I'm installing a expansion cabinet in superloop 4 0, All cards in main cabinet (superloop 0 0) works ok, I've got analog extension cards (ANLG M/WLC) in the expansion cabinet (superloop 4 0), these cards are not working, I dont have dial tone.
The MGC in superloop 4 0 shows in the display 0 0 4 0.
I installed and configured the follwing for the MGC in superloop 4 0:
*I installed the DSP32 card in slot 2 in the MGC card
*the DSP32 has its TLAN ip address
*I added the 32 VGW channels for the DSP32
*I configured TDS loop and conference loop for the MGC 4 0.
*I configured DTR channels for MGC 4 0.

the status of the VGW and DTR channels for the DSP32 and the MGC 4 0 is IDLE, I used LD 32 for seeing the status.
I dont know If I'm missing something.

 

[xinnam]

did you program the 32 dsp ports?

 

[lexer]

Thanks, xinnam, Yes I did, and the 32 DSP ports (VGW channels) appear IDLE when I see their status in LD 32

 

[Bucky101]

can you stat the falcs ??, i find i have to disable the cards, remove them, add them back in and then re'enable the cards to get them to work

 

[lexer]

Thanks Bucky, What are falcs?