Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS 1000

Status
Not open for further replies.

mycotel

Technical User
Apr 23, 2008
33
US
I have a CS1000 that's giving error code "err57 12 0 0 12. Any ideas? Thanks
 
ERR0057
Excess invalid input messages from digital sets. Every input message is
counted. When the total count reaches a limit, this error message will
be printed and the count is reset to zero. The TN printed is only the
TN that generated the last invalid message. Other TNs may have
generated earlier messages. If no faults are found on the reported unit
then investigate other cards.
Contact your next-level technical support.
Severity: Minor

Maybe bad set or TN

It's a phone system, NOT a clock!
 
this shouldnt cause you any issues but you could try re-flashing the firmware (fdlf TN)

Remember if it doesn't work hit it harder

Scott UK
 
I have replaced the digital line card, because several other phones on same card were going down. Now I have another digital card disabled, replaced that card too. Still getting ERR 57 code, Thanks for your support...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top