Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
crviewer / crystal report control
- Thread starter sexydog
- Start date
Not real sure what you're asking, but here's my take on what you're saying...
If what you're saying is that you want to install a report on a user's machine, and you want to know what files need to be installed at a minimum for that user to run the report, then the Viewer is the way to go.
If you want to program stuff in your favorite language,then the CR Control is the way to go.
When you install Crystal Dev 8.5, you get both installed on your local hard drive.
HTH, Tiger
If what you're saying is that you want to install a report on a user's machine, and you want to know what files need to be installed at a minimum for that user to run the report, then the Viewer is the way to go.
If you want to program stuff in your favorite language,then the CR Control is the way to go.
When you install Crystal Dev 8.5, you get both installed on your local hard drive.
HTH, Tiger
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question